jbruneau

I'd be trying to figure out why your 12V rail hit 13.216V!

That is over the 5% variance that most PSU's are supposed to run within. So, with that in mind, that should be sitting between 11.4V and 12.6V, no lower or higher...I'd be afraid of something blowing!

As for your heat, you're good. My A64 3200+ caps at 45 degrees with a Prime95 Stress of 1 hour, with a max physical of 75 degrees, and an automatic shutdown temp of 65 degrees. Some ASUS boards did misreport the temperature because they ran off the wrong Diode ! You can use SpeedFan to monitor temps and even the fans on the 3-Pin Connectors !

__________________
Jonathan

Let's face the obvious. Yesterday we were nerds. Today we're the cognitive elite. Let's conquer. - Chester G. Edwards





<!-- System Specs are to the Left -->

squall_leonhart

nah, its well within the limit of jbruneau. :P
simply becoz its a miss reading :P

in my bios my psu's +12v is 12.10v but in speedfan its 11.49v :|

and speed fan tends to have a .10 difference sometimes

__________________