| |  | | | |
 | | 
December 29th, 2007, 02:53 PM
|
#1 | | Advanced Newbie
| | CPU: AMD X2 +4600@3.2Ghz :) |
| | GPU: ASUS EN8600GT Silent |
| | M/B: Gigabyte GA-M52S-S3P |
| | RAM: KingstonHyperX LL 2GB |
|  Help on OC an x2 +4600 to 3.0
Hi there,
need some help from u
my currently oc is at 2.900
Bus speed is at 242 mhz
turn it to 250 mhz , got a bsod from xp
now my problem
I can`t turn the VCore higher as 1.200
don't know why at bios limit is 1.200
have done a bios update to the newest , no changes
the heat is at 31 C idle and 46 C load
got an M2N-E SLI Bios v. 1102
Kingston HyperX DDR 800 @ 805 mhz
cya aLeX
| 
|  | |
December 29th, 2007, 03:02 PM
|
#2 | | (ಠ_ರೃ)
| | CPU: 940 BE @ 3.62Ghz H2O |
| | RAM: 2x2GB 1.1Ghz HyperX BE |
| | PSU: Antec EarthWatts 500W |
|
try to update the bios maybe higher voltajes will be availaible.mine it's perfectly stable running @ 250fsb x 12multiplier but 1.4 v. also what core is it ... brisbane or windsor ?
__________________ ご自身の没落を見て、証人の終わり  | |
| | |
December 29th, 2007, 03:09 PM
|
#3 | | Advanced Newbie
| | CPU: AMD X2 +4600@3.2Ghz :) |
| | GPU: ASUS EN8600GT Silent |
| | M/B: Gigabyte GA-M52S-S3P |
| | RAM: KingstonHyperX LL 2GB |
|
I got the Windsor core
I updated the bios 2 days ago... its Rev 1102
looked at asus page , its the latest ver.
I also can't change the voltage at nTune | |
| | |
December 29th, 2007, 03:25 PM
|
#4 | | (ಠ_ರೃ)
| | CPU: 940 BE @ 3.62Ghz H2O |
| | RAM: 2x2GB 1.1Ghz HyperX BE |
| | PSU: Antec EarthWatts 500W |
|
mine's brisbane but i had the same problem when using the latest bios F13 but with the F11 i had control back into my hands try a previos bios version, it should be stable @ 3ghz 1.4 v
__________________ ご自身の没落を見て、証人の終わり
Last edited by Zamoldac; December 29th, 2007 at 03:51 PM..
| |
| | |
December 29th, 2007, 04:03 PM
|
#5 | | Advanced Newbie
| | CPU: AMD X2 +4600@3.2Ghz :) |
| | GPU: ASUS EN8600GT Silent |
| | M/B: Gigabyte GA-M52S-S3P |
| | RAM: KingstonHyperX LL 2GB |
|
i googled it , on m2n-e sli u cant turn the vcore higher. there must be an vcore bios mod or something .... | |
| | |
December 29th, 2007, 04:27 PM
|
#6 | | (ಠ_ರೃ)
| | CPU: 940 BE @ 3.62Ghz H2O |
| | RAM: 2x2GB 1.1Ghz HyperX BE |
| | PSU: Antec EarthWatts 500W |
|
 didn't know that but for a 100mhz difference it doesen't matter that much.
__________________ ご自身の没落を見て、証人の終わり | |
| | |
December 29th, 2007, 04:30 PM
|
#7 | | Advanced Newbie
| | CPU: AMD X2 +4600@3.2Ghz :) |
| | GPU: ASUS EN8600GT Silent |
| | M/B: Gigabyte GA-M52S-S3P |
| | RAM: KingstonHyperX LL 2GB |
|
i am currently at 2880 if i put to 3ghz it runs a few seconds and then the system hangs ... | |
| | |
December 29th, 2007, 04:34 PM
|
#8 | | (ಠ_ರೃ)
| | CPU: 940 BE @ 3.62Ghz H2O |
| | RAM: 2x2GB 1.1Ghz HyperX BE |
| | PSU: Antec EarthWatts 500W |
|
it doesen't have enough juice for the cpu, 1.2 v is to low... my brisbane has a default vcore of 1,35 and it runs great @ 2.9 ghz with that but if i increase it to 1.4 it runs with no problem at all on 3ghz or above.
__________________ ご自身の没落を見て、証人の終わり | |
| | |
December 29th, 2007, 04:44 PM
|
#9 | | Advanced Newbie
| | CPU: AMD X2 +4600@3.2Ghz :) |
| | GPU: ASUS EN8600GT Silent |
| | M/B: Gigabyte GA-M52S-S3P |
| | RAM: KingstonHyperX LL 2GB |
|
i know , but i cant take the vcore to 1,4 .... i google like shit
but cant find anything . I seen a cpu volt mod , with connecting the pins..
thats nothing for me | |
| | |
December 29th, 2007, 04:52 PM
|
#10 | | (ಠ_ರೃ)
| | CPU: 940 BE @ 3.62Ghz H2O |
| | RAM: 2x2GB 1.1Ghz HyperX BE |
| | PSU: Antec EarthWatts 500W |
|
try lowering the ht multiplier even more maybe that would make it more stable...
__________________ ご自身の没落を見て、証人の終わり | |
| | | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | Search this Thread | | | | | Rate This Thread | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
|
Copyright © NGOHQ.com - All rights reserved Reproduction in whole or in part in any form or medium without written permission of the site's owners is prohibited.
Powered by vBadvanced and vBulletin from Jelsoft
Copyright © 2000-2007 Jelsoft Enterprises Limited Search Engine Friendly URLs by vBSEO 3.3.2 | | |
