| |  | | | |
 | | 
December 26th, 2006, 02:36 AM
|
#1 | | Golden Oldie Member
| | CPU: Intel Q9550 @ 3.4 GHz |
| | GPU: XFX HD 5770 1GB GDDR5 |
| | M/B: MSI P45 Neo F (Rev. 1) |
| | RAM: 8 GB Dual Channel DDR2 |
|  It's always interesting....
...when you're able to do some overclocking but end up with worse benchmark scores than what you get with Default speeds. 
__________________ <-<-<-<-See Profile to the Left~~ Quote: |
If you have an issue with what you said, please resolve it in private | | 
|  | |
December 26th, 2006, 11:47 AM
|
#2 | | Stuck in "April 1st"
| | M/B: Asus Rampage Formula |
| | RAM: G.Skill 2x2GB PI Black |
|
Are you talking about CPUs or GPUs? Cause I've never seen a GPU that got worse results with overclocking.
__________________ IQ, when aggregated, follows Ohm's law. | |
| | |
December 26th, 2006, 01:31 PM
|
#3 | | Golden Oldie Member
| | CPU: Intel Q9550 @ 3.4 GHz |
| | GPU: XFX HD 5770 1GB GDDR5 |
| | M/B: MSI P45 Neo F (Rev. 1) |
| | RAM: 8 GB Dual Channel DDR2 |
|
Quote: |
Originally Posted by Unixlord Are you talking about CPUs or GPUs? Cause I've never seen a GPU that got worse results with overclocking. | In this case, both. I was able to boost my CPU from 2400 to 2520. Also, the video card from 594/695 to 608/720. But, I'm losing way too many points in the benchmarks....all of the 3DMark 03, 05, 06. I got better scores with the default settings.
It's got me puzzled a bit.
__________________ <-<-<-<-See Profile to the Left~~ Quote: |
If you have an issue with what you said, please resolve it in private | | |
| | |
December 26th, 2006, 02:30 PM
|
#4 | | Golden Member
| | M/B: GA-X48-DS5 + Asus P5E |
| | PSU: OCZ 700W + HIPER 580W |
|
Quote: |
Originally Posted by Dyre Straits In this case, both. I was able to boost my CPU from 2400 to 2520. Also, the video card from 594/695 to 608/720. But, I'm losing way too many points in the benchmarks....all of the 3DMark 03, 05, 06. I got better scores with the default settings.
It's got me puzzled a bit. | try with seting up a ddr latency(in bios) and grafic card latency to 32 or 64 | |
| | |
December 26th, 2006, 04:32 PM
|
#5 | | Professional Member
|
Maybe a new PSU, you overclocks isnt getting stable with your 400W psu (?). | |
| | |
December 26th, 2006, 06:23 PM
|
#6 | | Edelweiss Corporal
|
Quote: |
Originally Posted by xiaomhome Maybe a new PSU, you overclocks isnt getting stable with your 400W psu (?). | I did have this problem befor i got new PSU !
__________________ 
-----------------And if someone gave you a pile of gold, you'd probably complain that it was too heavy------------------- | 
| | |
December 26th, 2006, 09:19 PM
|
#7 | | Golden Oldie Member
| | CPU: Intel Q9550 @ 3.4 GHz |
| | GPU: XFX HD 5770 1GB GDDR5 |
| | M/B: MSI P45 Neo F (Rev. 1) |
| | RAM: 8 GB Dual Channel DDR2 |
|
Yeah, the PSU may just be the stickler. I have a 500W here that has 28A on the 12V Rail.... hmmm......
__________________ <-<-<-<-See Profile to the Left~~ Quote: |
If you have an issue with what you said, please resolve it in private | | |
| | |
December 26th, 2006, 11:11 PM
|
#8 | | Stuck in "April 1st"
| | M/B: Asus Rampage Formula |
| | RAM: G.Skill 2x2GB PI Black |
|
Get a nice heavy silent modular powerful psu with good fans to boot and try again.
__________________ IQ, when aggregated, follows Ohm's law. | |
| | |
December 26th, 2006, 11:31 PM
|
#9 | | Golden Member
| | M/B: GA-X48-DS5 + Asus P5E |
| | PSU: OCZ 700W + HIPER 580W |
|
if his cpu an gpu dont get needed power
pc will automaticly restartž
so i dont think that problem is in psu
check for bios updates maybe there is problem with tuning
p.s.there was some problems with this mbo bios LINK
Last edited by gen.Rage1991hrv; December 26th, 2006 at 11:35 PM..
| |
| | |
December 27th, 2006, 05:44 AM
|
#10 | | Golden Oldie Member
| | CPU: Intel Q9550 @ 3.4 GHz |
| | GPU: XFX HD 5770 1GB GDDR5 |
| | M/B: MSI P45 Neo F (Rev. 1) |
| | RAM: 8 GB Dual Channel DDR2 |
|
Quote: |
Originally Posted by gen.Rage1991hrv if his cpu an gpu dont get needed power
pc will automaticly restartž
so i dont think that problem is in psu
check for bios updates maybe there is problem with tuning
p.s.there was some problems with this mbo bios LINK | I have the latest BIOS, v 602, released just a few weeks ago. So, as long as there are not still problems with the BIOS, it has to be something else.
This is a Dual Rail PSU I'm using and there have been reported problems with these in the past. The 500W I referred to is Single Rail.
__________________ <-<-<-<-See Profile to the Left~~ Quote: |
If you have an issue with what you said, please resolve it in private | | |
| | | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | Search this Thread | | | | | Rate This Thread | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
|
Copyright © NGOHQ.com - All rights reserved Reproduction in whole or in part in any form or medium without written permission of the site's owners is prohibited.
Powered by vBadvanced and vBulletin from Jelsoft
Copyright © 2000-2007 Jelsoft Enterprises Limited Search Engine Friendly URLs by vBSEO 3.3.2 | | |
