HEEELLLLPPPP!!!!1

Mikey · April 23rd, 2005, 09:17 PM

Argh! I overclocked my CPU and it worked for a while, upped the FSB 1 HZ, and now it wont start. Everything boots up, the lights come on, the fans blow, and everything works except y mouse and my keyboard aren't read and nothing shows up on the monitor. HELP ME PLEASE. I'm on a different computer with an AMD, its a friends.

**Regeneration** · April 23rd, 2005, 10:23 PM

Have you tried to reset the cmos ?

Mikey · April 23rd, 2005, 10:56 PM

I dont f**k around with hardware much, and I read you have to take out the battery and all the connections and wait for 30 seconds, then plug it all back in and boot up. I don't mess with anything but RAM and Videocards.

mainman · April 24th, 2005, 04:05 AM

Hey bud, stay calm and relax. What motherboard do you have?

Is this it?

Chaos · April 24th, 2005, 05:42 PM

Also the battery does not have to be removed. There should be a jumper close to the battery that has to be changed then reset to it's original position after a few seconds and that's it. Even the rare time that the battery has to be removed it's just like removing a watch battery and there is usually a small tab on the battery holder that helps to remove the battery

squall_leonhart · April 24th, 2005, 06:26 PM

sometimes holding the Home or insert keys as you power on can revert to working bios settings as well

Mikey · April 24th, 2005, 09:47 PM

I got it, that is my motherboard, and I have that handbook, I flipped through it and found that and took 10 minutes finding that small short <_< anyway, thanks guys, I really appreciate it

Mikey · April 24th, 2005, 09:48 PM

I got it OC'ED to 3.6 ghz when I bought water cooling and 2 more fans, ans upped the Vcore voltage to 1.6. Sweet :rofl: