Overclocking question

nCaine · June 24th, 2007, 01:05 PM

OK i take out one of the sticks , lave only one 512 , and still the same , hang after some time of play. So its probable not the memory , and not the the ddr400 slot probs.

gen.Rage1991hrv · June 24th, 2007, 03:22 PM

hmmmmm strange
here is bios look and set up like this

this mbo you have is very good overclocker trust me you can get preaty high oc with it

nCaine · June 24th, 2007, 05:24 PM

Im not retarded friend , as i say befor , I CANT change any value in the memory freq.
Have the latest bios. , and from my experience with AMD , memory must run in synchronous mode to the processor bus , or else you get big impact on performance. Its not intel.

So what is it guys , is this right what is say ??

PS. I dunno but i think they crippled this CPU to not be a good overclocker.

i dunno , its actualy hard to even find review about this CPU.

gen.Rage1991hrv · June 24th, 2007, 05:36 PM

sorry but i dident say that you are retarded or anything like that
and i allso have amd barton so i think that i know something about that cpu
use everest to see if ddr have higher bandwith than cpu and you will see that it have
than you can set ddr on lower speed so you can rise cpu speed for higher performance

nCaine · June 24th, 2007, 06:04 PM

Ehh mate sorry to jump on you , have very bad day , i installed the everest , and what i was expecting its runs equal.

Here is pic.

gen.Rage1991hrv · June 24th, 2007, 06:09 PM

uuuuuuuuuu sorry but i cant see a bandwith because its trail version

nCaine · June 24th, 2007, 06:12 PM

I think that without unlocking the multipler , i will not go any more. The only option is to lower it , and rise the FSB , that way i culd get real good performace out of it , but i wont .

nCaine · June 24th, 2007, 06:25 PM

Here you go Rage

gen.Rage1991hrv · June 24th, 2007, 06:45 PM

hmmmmm strange and i was thinking that 3000 is working on 400fsb

nCaine · June 29th, 2007, 10:58 AM

Ok i found whats the problem is . Aparently my mobo was first of the KT400 , and its only limited to FSB 333 , after searching the web, i found out that it was actualy lil unfinished , and pushed to the market , to show of first KT400 mobo

.
Any one know what mobo i can use insted of this one ????

So anyway its good that its stable running on 358 FSB. But not even point more.

Update. Just noticed that the chipsed is not cooled in anyway , it even dont have simple radiator on it. When i put my finget on it it was hery hot , even in desktop , at minimum load. So im gonna go and get some radiator and cool it , and then meybe im gonna be able to go lil higher on the FSB. But i doub it.

Update2. Nope it dint help, but it needet to be cooled any was , so i swithed the orginal one on the chipset with the new zalman , and placed the old radiator on the bridge. Works great it now room temp