Ngo Driver Temp

Wu-TanG · December 6th, 2006, 03:40 PM

Hello guys i am new on this forum,

I have a XFX 7800GS XT en using the Normal 92.91.
But sometimes i have the problem the my screens go out and my pc crashes.
I heard from someone that the NGO drivers are good.
So i tried the nvodngov18426 but my temps are like 7C higher then normal.
First it was underload on 50C but now on 57C.
I uninstalled the NGO drivers but nothing changed, tried Driver Cleaner Pro no change :/.
What can i do?

Greetz,
Wu-TanG

Unixlord · December 6th, 2006, 03:44 PM

It's a secret feature to get your GPU hooken on NGO crack only.

Wu-TanG · December 6th, 2006, 03:46 PM

And what is that crack

Do u have any ideas because the temps realy piss me off.

Unixlord · December 6th, 2006, 03:53 PM

Quote:

Do u have any ideas because the temps realy piss me off.

Same here.
It appears that the default enabling of the overclocking section of the control panel in NGO drivers causes a mild problem with something about the card not idling properly when not under heavy use.

Try putting the card under load and see if the under load temp is any higher. That would give more clues.

Wu-TanG · December 6th, 2006, 03:55 PM

in Windows : 52C
in Game : 57C

Btw. If i format the PC would that make it to normal?

Unixlord · December 6th, 2006, 04:01 PM

in Windows : 52C
in Game : 57C
Those temps are fine. I can't see why you'd want to revert. Try the latest NGO and see if there's any difference.

Wu-TanG · December 6th, 2006, 04:03 PM

i tried it. But there was a bug in the clocks it said the the memory clock was something like 2.6ghz :/.
And the temps where same.
But if my gpu can idle lower why not!

Unixlord · December 6th, 2006, 04:09 PM

Nope looks like you won't get an answer.

Wu-TanG · December 6th, 2006, 04:17 PM

If i format the pc will this problem be over?

Unixlord · December 6th, 2006, 04:21 PM

It's an "issue" not a problem. You installed the drivers at your own risk you can format at your own risk and no guarantees for anything. I haven't tried formating. If install is fresh then I suppose formatting wouldn't be too painful.