| |  | | | |
 | 
February 2nd, 2008, 06:45 AM
|
#1 | | Newbie
| | GPU: Powercolor X1950 Pro |
|  Powercolor X1950 Pro Hardlock
Hello all! Just registered, so that is about as new as you get.
Heres my prob!
So i just reformatted my pc. ( before format, was running like a champ stock driver )Updated all drivers including 8.1 hotifx.
Was blowing threw widows applications running great. I loaded World of Warcraft, ran for about 5min and system lost video signal hardlocked ( i could hear voice on ventrilo repeating over and over and over ) then after it sits for a few mins restarts. Since then ive been working on it for around 3 days. Here is what ive done so far
Tried about 5 differnt drivers, including 1 that came with videocard
swapped out ram
bought new power supply 650w Antec Trio (only replaced because board wouldnt power up)
ive tried various other small tricks to try to get it working but to no avail
It will play counterstrike, quake 3, but if you try to play world of warcraft, it will lock up on you anywhere from 3 - 15min it varies.
Im completly out of ideas. help if possible | 
|  | |
February 2nd, 2008, 02:50 PM
|
#2 | | Extreme Member
| | GPU: Gainward Bliss 9600GT |
| | RAM: 4G OCZ Reaper X DDR2 |
|
Sounds like something to do with the card itself. Are you O/Cing and / or have you tried the card in another machine ?
BTW welcome to NGOHQ.com 
__________________ "People who live in glass houses shouldn't cast stones"
| |
| | |
February 2nd, 2008, 04:45 PM
|
#3 | | Professional Member
|
Try setting Overclocking Options (in your motherboard's BIOS) to Standard (instead of AUTO - auto messes up with voltages and memory timings sometimes) And if you can set your memory timings by yourself. If you're going to update your BIOS, change the settings AFTER the new BIOS is installed. | |
| | |
February 2nd, 2008, 08:55 PM
|
#4 | | Newbie
| | GPU: Powercolor X1950 Pro |
|  Powercolor X1950 Pro Hardlock
card is running completely stock speeds. Im going to check the bios settings now.
Thanks for input.
on VDDQ (AGP) Voltage Control BIOS setting
only options i have is Normal, +0.1v, +0.2v, +0.3v
Its set to Normal
Last edited by Twistedwedge; February 2nd, 2008 at 09:01 PM..
Reason: update
| |
| | |
February 2nd, 2008, 09:00 PM
|
#5 | | Newbie
| | GPU: Powercolor X1950 Pro |
|
also i have a AGP Click adjustment its set at 66 right now, i can up to 100 | |
| | |
February 3rd, 2008, 02:21 AM
|
#6 | | Newbie
| | GPU: Powercolor X1950 Pro |
|
/bump | |
| | |
February 3rd, 2008, 02:36 AM
|
#7 | | Dedicated Member
| | CPU: AMD X2 5000 @ 2856MHz |
| | GPU: GeForce GTS 250 512MB |
|
no doesn't sound like OCing, try installing just the 8.1 drivers only, not the hotfix and see what happens | |
| | |
February 3rd, 2008, 03:06 AM
|
#8 | | Spray 'n' Pray !
| | M/B: Gigabyte MA790FX-DQ6 |
| | RAM: 8GB OCZ AM2 DDR2-667 |
|
Maybe is the voltage given by the agp port ... sometimes when you change an component and you didn't settle the bios at optimal settings ... the settings are putted for the specs of the older components... so try to check this out... if your card lock up.. is only 2 things can do that ... Overclocking(VPU RECOVER) and the card is not enough supplied in power.
It's can be idiot... check your cables too  | |
| | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | Search this Thread | | | | | Rate This Thread | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
|
Copyright © NGOHQ.com - All rights reserved Reproduction in whole or in part in any form or medium without written permission of the site's owners is prohibited.
Powered by vBadvanced and vBulletin from Jelsoft
Copyright © 2000-2007 Jelsoft Enterprises Limited Search Engine Friendly URLs by vBSEO 3.3.2 | | |
