| June 2nd, 2013 11:53 AM |
| Unregistered |
I got this to work from 125 to 167, but how big of a difference is that? Is it noticeable?
|
| April 23rd, 2013 10:35 PM |
| hunt3rx3 | HELP
I need help. Cant get this to work. I have Windows 7 7600. Test mode is on, tried it 10 times, still nothing. Peak is 7.47ms 133Hz. Tried lowering too, not working either.
|
| April 23rd, 2013 08:31 AM |
| Unregistered |
just wondering what the best way to do this with multiple mice is.
i have a 1.1 and a 3.0 and want to have 500hz on both.
how can i make my second mouse 500hz? do i just run the Setup.exe from HIDUSBF's folder and select 500hz? or do i have to go through the whole signing thing as well?
thanks.
|
| March 7th, 2013 03:42 PM |
| Lenny |
Win 7 64bit 7601, usb 3.0, Mx518, no setpoint driver
I've tried this so many times now but I cannot make it go over 125hz. I can't even get it to work by pressing F8 before windows boots and disabling it that way. All I can do is to set it lower than 125hz, I get 31hz and 62hz by just installing it and unplugging it.
I'm seriously considering buying a mouse that can force x>125hz.
Appreciate any help.
|
| February 7th, 2013 07:31 AM |
| Jacob101980 | Windows 8
I tried using this to overpoll my intellimouse 1.1a and on windows 7 it worked great!
But now it just doesnt read the mouse correctly. I've used testmode with command line switches and disabled driver signing enforcement too, even replaced the HIDUSBF.sys myself in system32 folder. it /detects/ that its there but it just doesnt wanna work with it, and makes the mouse report as a "usb input device".
Any help or plans to update this, please reply :3 thank you for your time
|
| February 5th, 2013 08:08 AM |
| pocatos |
It is possible to modify the HIDUSBF.SYS to make it work in windows 8?
Currently does not operate its method. I have mouse razer diamondback 3g and need to increase the Hz.
or there is the possibility of modifying the usbport.sys?
Thanks for your reply.
P.S.: Sorry, no speak english, i am with google translate.
|
| December 9th, 2012 08:17 PM |
| cRACKmONKEY421 |
Any Windows 8 love yet? I can't get it to work and have tried everything. I'm considering buying a new expensive gaming mouse if the polling rate option is in the driver.
|
| October 23rd, 2012 04:36 PM |
| squall_leonhart | Quote:
Originally Posted by ZORRR  IS IT NORMAL, THAT HIDUSBF.sys SIGNED IN PROPERTIES OF FILE IN ..system32\drivers\, BUT IN "DEVICE MANAGER" IT SAYS THAT DRIVER IS UNSIGNED?!?!
Best regards, ZORRR. | Yes, its normal.
the properties of the files read by device manager come from the MUI file, which has not been updated for SP1 (and post sp1 usb fixes)
|
| October 23rd, 2012 04:31 PM |
| squall_leonhart |
ngohq's DSEO tool does that for you.
|
| October 23rd, 2012 02:56 PM |
| Calderon | WIN7 64 SP!
For those struggling with the USB port ending up unresponsive and not getting mouserate over 125, WITH WIN7 x64 SP1.
Do the stuff as described here, after that.
After BIOS Screen immediatly start pressing F8 and select Disable driver enforce blabla and start that way. Maybe there´s a way to automatically start that way too. but atleast my MX518 works now!
|
| October 9th, 2012 05:28 PM |
| ZORRR | Device Manager problems with hidusbf.sys
Thanks for answer, Regeneration.
But I think I can do it with my "cheap mice"!  Maybe cuz I remember how great it was in other system. So I will try to do it again, at Win7 x64 Ultimate.
I have one more question:
In hidusbf.sys file properties (right click -> properties on hidusbf.sys in system32/drivers) I can see that it has been signed by NGO. But when I found it in Device Manager(right click on my PC -> "Device Manager -> HID Devices -> I find my USB port -> right click -> properties -> Driver -> Data") I see that all drivers are signed in that folder, except hidusbf.sys!
It looks like:
[-=-] hidclass.sys (Code Signing: Microsoft Windows)
[-=-] hidparse.sys (Code Signing: Microsoft Windows)
[-=-] hidusb.sys (Code Signing: Microsoft Windows)
hidusbf.sys (Code Signing: Digital signature is missing) and I have no flag left to hidusbf.sys like files before have.
* [-=-] it's my try to describe that flag near .sys files! As I said, I have no one near hidusbf.sys and it says that it is not signed!
So main question is:
IS IT NORMAL, THAT HIDUSBF.sys SIGNED IN PROPERTIES OF FILE IN ..system32\drivers\, BUT IN "DEVICE MANAGER" IT SAYS THAT DRIVER IS UNSIGNED?!?!
If it's O.K. I will probably back to XP and try it on XP again. But if it's not correct, say me please what should I do to sign hidusbf.sys in my "Device Manager -> USB port".
My OS: Windows 7 x64 Ultimate
Thanks for answers, I hope someone will help me!
Best regards, ZORRR.
|
| October 7th, 2012 11:08 AM |
| Regeneration |
A4Tech produces cheap mice. I don't think it will work.
|
| October 6th, 2012 10:31 AM |
| ZORRR |
Hey guys! I have a question.
May I overclock by hidusbf this mouse - a4texh -x710BK?
Before I changed from XP to W7 I remember it worked, but now it's not working. Some people said that a4tech mouse can't be overclocked, but I'm sure that I done that in XP.
Who can help me and answer my questions?
Thanks alot!
|
| September 9th, 2012 10:07 PM |
| Unregistered |
Greatest tutorial ever. THX!
|
| July 26th, 2012 07:08 AM |
| Vertel-nekeer |
My windows dont want to boot in "test mode" at all? Anyone know how? I have
Microsoft Windows 7 Ultimate 64bit (Build 7601: Service Pack 1)
I tried few solutions, but i just cant boot in "Test Mode"
|
| June 26th, 2012 08:19 AM |
| Unregistered |
Has anyone manage to successfully change the polling rate in Windows 8 RC/RP 64 bit?
|
| May 24th, 2012 02:35 PM |
| Unregistered |
I got this to work, May 24, 2012, after fussing with it for 4 hours. Some things that I ran into are indentical to those others saw, and here are the answers to a couple symptoms I found that were the same for others (for WIndows 7 64-bit 6.1 Build 7601).
The failure to install hidusbf.INF that shows up as a quickly disappearing window, then "nothing happens", actually was an install. It just installed so fast and the event completion banner disappears so fast that the impression was that it failed. When you see this, go on about the process.
When "Setup" opens the window and no device is there to select, try turning off "Mouse Only". For whatever reason some mice, including mine (Microsoft Optical Comfort Mouse 3000) don't show up as selectable "mice". Once I allowed the Setup to look at everything, my mouse was quickly found.
Setting the rate at 500 didn't appear to take immediately, as verified by Mouserate, even if I used Setup's "Restart" button. I had to "Restart" there, then reboot the computer to get it to take.
Be sure to Sign your /Windows/System32/drivers/hidusbf.sys file with Dseo after the install completes. I had to do that as well.
Hope this helped
|
| May 15th, 2012 11:46 AM |
| Unregistered |
^^^ same exact problem as miki, this is beyond frustrating, i've done this flawlessly on 3 different computers and today i have a fresh install of win7 on my new ssd and following the steps does not change my polling rate on my mx518.
Miki i tried using the USBPORT.SYS from my old windows install, but it says i access denied even though i have admin privelages and i have altered files in that folder before (to copy paste hidusbf.sys)
|
| April 19th, 2012 08:32 PM |
| miki |
Have tried basically everything but the polling rate stays at 125hz. The mouse is MX518 and the OS 64-bit 7. I have also done this succesfully before on a Vista system.
I also can't even get the DSEO watermark to show up, is this normal?
Anyway I can do all the steps in all the guides from start to finish and seemingly everything is okay and the mouse works but the rate stays at 125hz. I'd really rather not do a complete re-installation, there must be a simpler way. The original readme of the HIDUSBF mentions that the original unaltered syster driver USBPORT.SYS has to be in place for it to work. Maybe this is the problem? Where could I download it?
Really at a dead-end here. Any help?
|
| April 12th, 2012 01:48 PM |
| Unregistered | Mouseacc
I got the 500hz on my 3.0 IME. Vista x64bit.
But now my mouse sometimes having wierd mouseacc? All mouse acc settings is off. Anyone else had this problem?
|
| March 23rd, 2012 08:57 PM |
| Unregistered | Quote:
Originally Posted by BSE Ok so, the guys who have problems with usb ports not working after restart, I had the same problem here's how to fix it.
When that happens, plug your mouse in some other usb port, open the device manager and keep it opened. Now plug the mouse back to the port that's not working, there should now be a mouse device with an error in the device manager. Use the keyboard to select it and press SHIFT+F10, now select uninstall. Plug out the mouse and plug it back in, it should reinstall itself.
-BSE |
Thanks man! Helped me alot!
|
| March 12th, 2012 10:26 PM |
| extremist15 | just doesn't work everyway i tryed that was posted
i tryed this with a wireless ms mouse didn't work then i tryed it with a normal optical mouse that uses windows drivers and it worked perfectly .92 ms and 1024 hz then after a while bought a new mouse for better dpi i have a cyborg rat 3 and i tryed all the same instuctions didn't work uninstalled previous mice and still nothing tryed over and over and it just stays at 145 hz and 6.8 ms but the mouse is supose to be at 500hz and 1.2ms by itself so windows is restricting my mouse from being full speed how do i fix this ?
|
| March 9th, 2012 08:07 AM |
| Wulfgar |
Can't seem to get this to work for my diamondback 3g. Peaks out at 125Hz, every time.
Windows 7 Ultimate 64-bit SP1, build 7601 - Motherboard is a Foxconn H-RS880-uATX "Aloe" - Yes, I know, it's a OEM motherboard from HP. Do I care? No. It works, and that's all I care for at this time.
I had no issues with the install or anything. Just won't work. Also, the program seems to think my keyboard (razer blackwidow ultimate) is a mouse. Not sure why, but I figured I'd just throw that out there lol.
|
| March 7th, 2012 10:43 AM |
| Unregistered | Thanks!
Great job! works fine! -Logitech
|
| December 29th, 2011 11:51 PM |
| TimCarey | Helping the handicap
This sample rate increase works great. I'm handicapped and use a touch pad mouse. As a recent the wire got a short but ever since I got a new one small movements we register nothing on to a larger movement would register it. I had all settings to most sensitive. Now that I increased the sampling rate to 500 things seem to be working great. The sample rate checkers don't register any higher, but things are working better.
|
| November 26th, 2011 07:24 AM |
| Unregistered |
when i try to install HIDUSBF i get error sayin "Failed to install"
|
| October 31st, 2011 06:52 PM |
| Richard |
hi
didn't work on my razer diamondback on W7 x64 (7601 sp1)
Usb port died => return to last good configuration => 125hz
some1 have an idéa ?
thx
|
| October 28th, 2011 06:26 PM |
| Unregistered |
I just bought an Intellimouse 3.0 and none of the tutorials are working.
It always ends up with 125hz or the USB port not working anymore(then I have to go to Device Manager and uninstall de mouse drivers, unplug and plug back in)
This used to work fine with the mx518, but apparently not with the 3.0. Any clues?
|
| October 4th, 2011 11:52 AM |
| meme |
I just cant get it to work. I have Windows7 - 64bit - SP1... it keeps getting stuck at 125hz. I followed all your steps. Even tried this in safe mode several times...
|
| September 5th, 2011 01:57 PM |
| Skwi |
Thanks, mx518 @ 1000Hz now.
(I feared at first when my USB port didn't respond. Just had to uninstall USB driver with the device manager)
My mistakes where no rebooting and bad link to system32.
|
| August 28th, 2011 07:48 AM |
| Unregistered |
Worked on xp64 (dimr.exe shows a better rate..) thanks for this 1000hz didn't even need the hidusb thing.. I got an mx518 so maybe that's why? not sure..
|
| August 27th, 2011 06:58 AM |
| Unregistered |
what is 7601 just wonderin?
|
| August 17th, 2011 02:57 PM |
| meh |
my mouse doesn't show up at all when i start setup.exe if i uncheck mouse only box i can see it and had the poll rate changed and it still doesn't work (I did all the steps in order to make it work). How can i fix it?
|
| August 9th, 2011 09:36 PM |
| Unregistered | How to Increase USB Sample Rate in Windows Vista/7
Vista X64 & MX518 at 500Hz - no problems.
|
| August 9th, 2011 06:34 AM |
| Dro |
Im using a wmo1.1 On Windows 7 64bit, build 7600. Its proven to work at both 500 and 1000 hz. I've tried signing every single SYS and INF file before and after placing them in the right directories. I'm in safe mode. I've followed each walkthrough step by step but still nothing... The mouse works every time but it refuses to go above (or below) 125 hz. Need additional advice or software please.
|
| August 3rd, 2011 03:32 AM |
| Unregistered |
How did you guys with the Razer Diamondback get it above 125 Hz? I don't have the 3G version, just the original Diamondback with red leds. I was able to get it down to 62/31 Hz in case the hidusbf driver wasn't working, but getting it above 125 Hz is impossible on Win 7 Ultimate 64.
|
| July 30th, 2011 02:54 PM |
| TunaK |
works fine on microsoft 1.1 .. THX!!!
|
| July 5th, 2011 05:10 AM |
| Unregistered | this work
this work fine in win 7 pro
|
| June 4th, 2011 10:13 PM |
| Unregistered |
Thats because it is working perfectly...your hz does change with movement.
|
| May 30th, 2011 12:41 AM |
| HEY | QUESTION
So I tried it out, and it was all jelly. I checked the rate checker, and I'm getting anywhere from 10 Hz (when moving the mouse slowly) all the way to 1000Hz (when tracking fast), with an average of 750 Hz. Is it supposed to be wildly varying like that?
|
| May 27th, 2011 03:58 PM |
| Ar@gon | Works!
Works like a charm!
(W7 32 bit)
Cheers!
|
| May 21st, 2011 08:39 PM |
| Sebash |
I did it by steps EpicNerd but ppl tell me something. I got now 500hz on my Windows 7 64 bit build 7601 sp1. on my mx518 but if i disable test mode it go back to 125hz, so i must have always test mode on?
|
| May 14th, 2011 09:08 PM |
| Works |
Works on Windows 7 x64 SP1 (7601) with the Logitech MX518. (only tried 500Hz)
NOTE: YOU NEED TO CHECK "Filter On Device" TO INSTALL THE DRIVER
|
| April 28th, 2011 12:42 AM |
| Unregistered |
Haven't been able to get it to change from 125Hz..
Win7 Home 64-bit, Build 7601
When I followed the steps, I ended up with an hidusbf.sys file in my SysWOW64 drivers folder, but not in System32. If I look at the properties, it says signed by NGO. I tried copying that file over to the System32 drivers folder like someone mentioned, but that hasn't done anything.
No problems with USB ports not working.. no errors at all, just polling rate still at 125Hz.
|
| April 26th, 2011 01:17 AM |
| Unregistered |
mx500 at 500hz successfully!
|
| April 20th, 2011 04:39 PM |
| Unregistered |
Hey, I got a vista 32.. and I bought a intellimouse 3.0 and patched it to 500Hz, but still it goes like a curve when I turn right/left up/down :S:S:S really annoying since I am pro gamer and aims alot on head. Any help please?
|
| April 19th, 2011 09:13 AM |
| Unregistered | HELP
When i changed it to 500 mine only reaches to 300? help?
|
| April 14th, 2011 12:56 PM |
| Unregistered |
Thanks to EpicNerd for getting it working!
I was wondering though, do I need to keep test mode enabled after I configured everything? Or can I run DSEO again and disable it?
Also, what's this watermark everyone is talking about? I can't see it :s
|
| April 8th, 2011 12:37 PM |
| Duracellmumus |
Hi! if i select the "filter" the mouse not work. i try all off the 3 hidusbf sys file....
Can u reset it with the setup.exe, and keybord(tab,space). first uncheck "mouse only" now apper the lost mouse, select it and unchek the filter. If conect other usb device close and open agin, select "other usb device" repeat the unchek... close, delete
... Thx for experience |
| March 12th, 2011 06:53 AM |
| Unregistered |
Here worked fine
Win7 x64 Ultimate SP1 build7601
Logitech MX518 Working at 1000hz
|
| March 5th, 2011 10:34 AM |
| BSE |
Ok so, the guys who have problems with usb ports not working after restart, I had the same problem here's how to fix it.
When that happens, plug your mouse in some other usb port, open the device manager and keep it opened. Now plug the mouse back to the port that's not working, there should now be a mouse device with an error in the device manager. Use the keyboard to select it and press SHIFT+F10, now select uninstall. Plug out the mouse and plug it back in, it should reinstall itself.
-BSE
|
| March 2nd, 2011 04:40 PM |
| Unregistered |
I did this on windows 7 x64 for an old MX500 mouse and set the polling rate to 1000hz successfully.
|
| February 22nd, 2011 07:37 PM |
| Scott |
Hi.
It worked for me (windows 7 x64 7600 relase)
Thanx alot ;] Im using intelimouse 3.0 and i started to think to buy new mouse but after that solution i dont need it ;] thx again;]
|
| February 20th, 2011 07:03 PM |
| DarkUltra | Quote:
Originally Posted by Unregistered >If your USB port stopped working, just try plugging it to another port.
If usb port "stop working" (actually it mean that Win can't load driver for the device) simply _delete_ hid device with problem in device manager and refresh configuration.
RTFM
--- SweetLow --- | That did not work. The only thing that did was to reboot the computer and choose load unsigned drivers (forgot what it is called). However, recently everything seem to have magically fixed itself.
|
| February 10th, 2011 08:29 AM |
| Unregistered |
>If your USB port stopped working, just try plugging it to another port.
If usb port "stop working" (actually it mean that Win can't load driver for the device) simply _delete_ hid device with problem in device manager and refresh configuration.
RTFM
--- SweetLow ---
|
| January 10th, 2011 07:20 AM |
| mkey | Quote:
Originally Posted by Unregistered After two tries i can no longer use the mouse on the first two port of the USB hub | You should probably delete the driver, I'm not sure anymore how would that be performed though.
From previous posts
Posted by mkey on June 9th, 2009, 07:31 AM
When you connect the mouse can you see it in the device manager? You could uninstall it there and select the option to have the driver removed. IDK really, just a thought.
Of course, a fresh windows install will surely help ya
Posted by pjm77 on June 9th, 2009, 07:31 PM
It's not gonna work, this mouse works fine in every other USB port except two mentioned (got 5 in total in my notebook), so it's not a driver issue. This hidusbf affected these USB ports somehow, even if the driver itself was not installed (I did a search for hidusbf.sys on my whole system partition and none was found). Fresh install would probably help but it's not an option for me now, just lost a weekend to set up the new system two weeks ago and can't afford that again timewise.
Posted by pjm77 on June 9th, 2009, 10:42 PM
blah, blah, blah... Contrary to what I thought the method you proposed helped instatly. The mouse connected to the "wrong" port showed up as an unknown hid device. Uninstalling it from device manager and plugging it again solved the problem, second USB port started working right away also. Thanks a million!
|
| January 8th, 2011 10:48 PM |
| Unregistered |
I tried this all step by step and i didn't notice a f*cking difference. I use cyborg RAT 7 mouse and i thought that if i change refresh rate on the mouse i will have "more responsive" mouse, but it didn't worked as i expected. Neither in Windows 7 64-bit neither in games!
So is there another way to make mouse more precise or Windows 7 have it integrated ?
greetings, Lukanov
PS: i forgot to mention that i used my mouse after USB hub on my desk. After two tries i can no longer use the mouse on the first two port of the USB hub |
| January 8th, 2011 12:51 PM |
| Ryniuu |
So... guys I have got Win7 x64 build 7600 and mx518.
I followed from very beginning to an end with EpicNerd's footsteps and everything works just fine! perfectly.
Thx for support. The in-game difference is able to seen in first seconds.
|
| January 7th, 2011 09:12 PM |
| RancidFerret | Problem with Steam
Worked fine on first try with Windows 7 Ultimate 64bit here. However it did cause a huge problem that I haven't seen anyone else mention. Whenever I try to launch Steam now I get this error "steam.exe (main exception): the registry is in use by another process".
Has anyone else experienced this? Is Steam working fine for those of you that have gotten the mouse hack to work? Also, what is the name of the service that setup.exe installs? I want to disable it to see if that is what is causing the issue with Steam.
|
| January 7th, 2011 08:49 PM |
| Unregistered |
Im using this on Windows 7 ULTIMATE x64 and I cant get my MS IntelliMouse 3.0 to go over 249hz... Ive done everything right please help me.
|
