Need An Immediate Help!

MuleSkinner · September 30th, 2006, 07:26 PM

my freind got a k8ns-triton agp939 mother board and i need to know how to clear the CMOS the mobo's menu says that i should Short 1-2 pin but i dont understand wat the hell should i do plz help me with this, THNX

gen.Rage1991hrv · September 30th, 2006, 07:37 PM

heh

LOL

near cmos batery you have 3 pins
junper is seted on 2-3(default)
if you put him on 1-2 pin you will restart bios (wait around 10 sec. and dont start pc)
after 10 sec put junper back on 2-3 pin

p.s. pc have to offline(turned off) when you restart bios

MuleSkinner · September 30th, 2006, 07:51 PM

there's only 2 pins dude... and there's no COVER...

S31Kronos · September 30th, 2006, 08:10 PM

You'll have to borrow a jumper (you can use the one from a cd rom drive), just put it on with the computer off. let it sit for 10 seconds, then take it off and put it back on the cd rom drive.... Your cmos should be reset.

MuleSkinner · September 30th, 2006, 08:18 PM

yo just to be clear the jumper is that blue little thing that connect the 2 pins rite??? plz tell me yes -THNX

gen.Rage1991hrv · September 30th, 2006, 08:45 PM

Quote:

Originally Posted by MuleSkinner

yo just to be clear the jumper is that blue little thing that connect the 2 pins rite??? plz tell me yes -THNX

yes

waylost · September 30th, 2006, 09:03 PM

Why hasn't anyone mention that you have to remove the battery first before you clear the cmos? then after you clear it, you reinstall the battery.

gen.Rage1991hrv · September 30th, 2006, 09:12 PM

Quote:

Originally Posted by waylost

Why hasn't anyone mention that you have to remove the battery first before you clear the cmos? then after you clear it, you reinstall the battery.

WTF????

how can you restart cmos if you remove battery???????
lol

zme-ul · September 30th, 2006, 09:53 PM

the right way to do-it:

pull the cord from the power supply, press the power button once to force the remaining curent out of the capacitors, remove the cmos battery for about 5 minutes, put it back in, plug the cord to the power supply

easy no?

MuleSkinner · October 1st, 2006, 01:12 AM

i did the battery thing before for about a minute... before u told me that i have to put a jumper............ and nothing worked,i think that the bios is Burned? or smthing else