| |  | | | |
 | | 
August 28th, 2008, 01:45 AM
|
#1 | | Newbie
| | CPU: Athlon 64 5000+ 2.5ghz |
| | RAM: 4gb Corsair XMS2 DDR2 |
|  DFI LanParty Dark 790FX | |
Out of curiosity does anyone else have this mobo?
And if yes, Can you use USB Cardreaders?
i can use all USB devices except a card reader... says Unknown device detected..
__________________  | 
|  | |
August 28th, 2008, 03:09 AM
|
#2 | | Should I have an title?
| | M/B: Gigabyte MA790FX-DQ6 |
| | RAM: 8GB OCZ AM2 DDR2-667 |
| | PSU: Antec EarthWatts 500W |
|
An CardReader use an internal motherboard usb plug ... as i saw on this board (like every boards) it have internal usb connector. So the answer should be yes bro  Personaly DFI board are really overclocking friendly and they are good stuff Keep care of this board bro
P.S : If the attachement is your board (maybe i did an mistake for the pic) The USB CardReader USB internal plugs are inside the RED BOX who i putted on the picture(With thoses plugs you can plug usb front pannels etc(All the stuff who is on the USB)
__________________ 
Last edited by IModAmd; August 28th, 2008 at 03:14 AM.
| |
| | |
August 28th, 2008, 01:56 PM
|
#3 | | Newbie
| | CPU: Athlon 64 5000+ 2.5ghz |
| | RAM: 4gb Corsair XMS2 DDR2 |
|
So I should just buy one that connects to the internal plug, and not a external USB port?
Update note.
Since i switched from my MSI 790x mobo and gone to this DFI 790FX
My successful Boot up rate is about 1 per 10 tries..
Its loads my Vista slower..
I've never had a defective mobo b4 so out of curisoity is it a defect?
__________________
Last edited by Suiseiseki; August 28th, 2008 at 07:58 PM.
| |
| | |
August 28th, 2008, 11:08 PM
|
#4 | | Should I have an title?
| | M/B: Gigabyte MA790FX-DQ6 |
| | RAM: 8GB OCZ AM2 DDR2-667 |
| | PSU: Antec EarthWatts 500W |
|
Quote:
Originally Posted by Suiseiseki  So I should just buy one that connects to the internal plug, and not a external USB port?
Update note.
Since i switched from my MSI 790x mobo and gone to this DFI 790FX
My successful Boot up rate is about 1 per 10 tries..
Its loads my Vista slower..
I've never had a defective mobo b4 so out of curisoity is it a defect? | I just dont get what you're trying to say... there no buying to do... when you have an CF Reader on your pc you need to connect the plugs on the specificated area i told u ... take an pic of your card reader just for be sure
__________________
| |
| | |
August 29th, 2008, 10:43 PM
|
#5 | | Loyal DAAMIT User
|
Everytime you change a Motherboard you should ALWAYS reinstall your os, or else you are bound to have errors... it doesn't mean your card reader doesn't work. Since you changed your mobo, reinstall your OS even if the two mobos have the same chipset.
__________________ AMD Athlon X2 6000+ -- ASUS M2A-VM -- Kingston KVR DDR2-800Mhz 4096mb -- Enermax FMA II 535w -- Antec Three Hundred Case -- Western Digital Caviar 120gb SATA -- Samsung SpinPoint 200gb SATA2 -- Sapphire Radeon HD3850 PCI-E -- ASUS Xonar DX PCI-E Sound Card -- 2x LG DVD 20x SATA Burners -- SilverStone FM122 HighFlow Side Panel Fan, 2x Antec Tricool LED front fans -- 1 top + 1 rear Antec Tricool Fans | |
| | |
August 30th, 2008, 03:08 AM
|
#6 | | Newbie
| | CPU: Athlon 64 5000+ 2.5ghz |
| | RAM: 4gb Corsair XMS2 DDR2 |
|
the ard reader is an extrnal USB powered one that i am using 
Thats the one i am using, i also have 2 dif brnds as well.
And second posters comment.
I know ya should reinstall os but i didnt since i need the vista cd, i only have a serial, that is legit and was gifted for me
__________________ | |
| | |
August 30th, 2008, 04:18 AM
|
#7 | | Should I have an title?
| | M/B: Gigabyte MA790FX-DQ6 |
| | RAM: 8GB OCZ AM2 DDR2-667 |
| | PSU: Antec EarthWatts 500W |
|
You can use this card reader as well... it's an usb port... normaly it's suposed to be dected... if not go take the driver of the Card Reader
__________________
| |
| | |
August 30th, 2008, 05:53 AM
|
#8 | | Newbie
| | CPU: Athlon 64 5000+ 2.5ghz |
| | RAM: 4gb Corsair XMS2 DDR2 |
|
thats the problem the website dont offer a diver for it , only drivers they offer for it are for win98 nd earlier
__________________ | |
| | |
August 30th, 2008, 09:26 PM
|
#9 | | Should I have an title?
| | M/B: Gigabyte MA790FX-DQ6 |
| | RAM: 8GB OCZ AM2 DDR2-667 |
| | PSU: Antec EarthWatts 500W |
|
If it work on another vista machine try to take the raw driver from the computer and put it on yours....
__________________
| |
| | |
August 31st, 2008, 07:15 AM
|
#10 | | Newbie
| | CPU: Athlon 64 5000+ 2.5ghz |
| | RAM: 4gb Corsair XMS2 DDR2 |
|
how do do that?
__________________ | |
| | | |
| Thread Tools | | | | Rate This Thread | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
| ATI Radeon HD 4870 4850 3850 3870 2900 2600 NVIDIA GeForce 280 260 9800 9600 8800 8600 - NGOHQ.com
Copyright © NGOHQ.com - All rights reserved Reproduction in whole or in part in any form or medium without written permission of the site's owners is prohibited.
Powered by vBadvanced - Template by ForumMonkeys
Powered by vBulletin from Jelsoft Enterprises Ltd
Copyright © 2000-2007 Jelsoft Enterprises Limited
LinkBacks Enabled by vBSEO 3.1.0 | | |
