| |  | | | |  | |
August 26th, 2007, 11:56 AM
|
#1 | | Golden Oldie Member | | CPU: Intel E6700 @ 3.2 GHz | | | M/B: MSI P45 Neo F (Rev. 1) | | | RAM: 8 GB Dual Channel DDR2 | | RAM Controllers Just curious here. How many RAM Controllers are listed in your Device Manager/System Devices?
Offhand, I don't recall seeing so many before:
__________________ <-<-<-<-See Profile to the Left~~
Last edited by Dyre Straits; June 16th, 2008 at 12:29 PM..
|
| |
August 26th, 2007, 01:06 PM
|
#2 | | cel rau | wierd .. I have none
__________________ 人は地獄を作った |
| |
August 26th, 2007, 01:22 PM
|
#3 | | Extreme Member | | GPU: Gainward Bliss 9600GT | | | RAM: 4G OCZ Reaper X DDR2 | | None here either Dyre only memory device I have listed in system devices is DMA controller ...
__________________ "People who live in glass houses shouldn't cast stones" |
| |
August 26th, 2007, 03:26 PM
|
#4 | | Stuck in "April 1st" | | M/B: Asus Rampage Formula | | | RAM: G.Skill 2x2GB PI Black | | I've got 10.
__________________ IQ, when aggregated, follows Ohm's law.
Last edited by Unixlord; August 26th, 2007 at 03:29 PM..
Reason: Screenshot
|
| |
August 26th, 2007, 03:35 PM
|
#5 | | Golden Member | | M/B: GA-X48-DS5 + Asus P5E | | | PSU: OCZ 700W + HIPER 580W | | check the asus site for drivers
(i had same problems with nforce3 board and that problem is slowing down your pc)
Last edited by gen.Rage1991hrv; August 26th, 2007 at 03:48 PM..
|
| |
August 26th, 2007, 05:03 PM
|
#6 | | Site Staff | Six nForce Memory Controllers and One Standard. |
| |
August 26th, 2007, 05:47 PM
|
#7 | | Golden Member | | M/B: GA-X48-DS5 + Asus P5E | | | PSU: OCZ 700W + HIPER 580W | | lol put official asus-nvidia drivers and u will get only one |
| |
August 26th, 2007, 07:35 PM
|
#8 | | Extreme Member | | GPU: Gainward Bliss 9600GT | | | RAM: 4G OCZ Reaper X DDR2 | | Just following along here and may have learned something as well. All my motherboards for the last 5 years or so have used Intel chipsets ... so this RAM controller appearing in System Devices is inherent in boards with NForce chipsets then ?
__________________ "People who live in glass houses shouldn't cast stones" |
| |
August 26th, 2007, 08:43 PM
|
#9 | | Golden Oldie Member | | CPU: Intel E6700 @ 3.2 GHz | | | M/B: MSI P45 Neo F (Rev. 1) | | | RAM: 8 GB Dual Channel DDR2 | | For the record, I'm presently using an ASUS P5N-E Sli board. I've updated the BIOS to 703 [released just over a week ago] and have installed the latest Chipset drivers from ASUS. But, those drivers are getting close to a year old now.
This newer BIOS claims to make the board more compatible with newer Memory Modules and to provide compatibility with newer Processors.
After all of this, I still have all those RAM controllers listed.
__________________ <-<-<-<-See Profile to the Left~~ |
| |
August 26th, 2007, 08:46 PM
|
#10 | | Golden Member | | M/B: GA-X48-DS5 + Asus P5E | | | PSU: OCZ 700W + HIPER 580W | | have you tryd to use some other ddr |
| |  | | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | Search this Thread | | | | | Rate This Thread | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |
Copyright © NGOHQ.com - All rights reserved Reproduction in whole or in part in any form or medium without written permission of the site's owners is prohibited.
Powered by vBadvanced and vBulletin from Jelsoft
Copyright © 2000-2007 Jelsoft Enterprises Limited Search Engine Friendly URLs by vBSEO 3.3.2 | | |